BigDog is a dynamically stable quadruped military robot platform that was created in 2005 by Boston Dynamics with the Harvard University Concord Field Station. It was funded by the U.S. Defense Advanced Research Projects Agency (DARPA), but the project was shelved after the BigDog's gas engine was deemed too loud for combat. == History == BigDog was funded by the Defense Advanced Research Projects Agency (DARPA) in the hopes that it would be able to serve as a mechanic pack mule to accompany soldiers in terrain too rough for conventional vehicles. Instead of wheels or treads, BigDog uses four legs for movement, allowing it to move across surfaces that would be difficult for wheels. The legs contain a variety of sensors, including joint position and ground contact. BigDog also features a laser gyroscope and a stereo vision system. BigDog is 3 feet (0.91 m) long, stands 2.5 feet (0.76 m) tall, and weighs 240 pounds (110 kg), making it about the size of a small mule. It is capable of traversing difficult terrain, running at four miles per hour (6.4 km/h), carrying 340 pounds (150 kg), and climbing a 35 degree incline. Locomotion is controlled by an onboard computer that receives input from the robot's various sensors. Navigation and balance are also managed by the control system. BigDog's walking pattern is controlled through four legs, each equipped with four low-friction hydraulic cylinder actuators that power the joints. BigDog's locomotion behaviors can vary greatly. It can stand up, sit down, walk with a crawling gait that lifts one leg at a time, walk with a trotting gait lifting diagonal legs, or trot with a running gait. The travel speed of BigDog varies from a 0.62 mph (1 km/h) crawl to a 3.3 mph (5.3 km/h) trot. The BigDog project was headed by Dr. Martin Buehler, who received the Joseph Engelberger Award from the Robotics Industries Association in 2012 for the work. Dr. Buehler while previously a professor at McGill University, headed the robotics lab there, developing four-legged walking and running robots. Built onto the actuators are sensors for joint position and force, and movement is ultimately controlled through an onboard computer which manages the sensors. Approximately 50 sensors are located on BigDog. These measure the attitude and acceleration of the body, motion, and force of joint actuators as well as engine speed, temperature and hydraulic pressure inside the robot's internal engine. Low-level control, such as position and force of the joints, and high-level control such as velocity and altitude during locomotion, are both controlled through the onboard computer. BigDog was featured in episodes of Web Junk 20 and Hungry Beast, and in articles in New Scientist, Popular Science, Popular Mechanics, and The Wall Street Journal. In September 2011 Boston Dynamics released video footage of a new generation of BigDog known as AlphaDog. The footage shows AlphaDog's ability to walk on rough terrain and recover its balance when kicked from the side. The refined equivalent has been designed by Boston Dynamics to exceed the BigDog in terms of capabilities and use to dismounted soldiers. In February 2012, with further DARPA support, the militarized Legged Squad Support System (LS3) variant of BigDog demonstrated its capabilities during a hike over a rough terrain. Starting in the summer of 2012, DARPA planned to complete the overall development of the system and refine its key capabilities in 18 months, ensuring its worth to dismounted warfighters before it is rolled out to squads operating in-theatre. BigDog must be able to demonstrate its ability to complete a 20-mile (32 km) trail in 24 hours, without refuelling, while carrying a 325-pound (150 kg) load. A refinement of its vision sensors will also be conducted. At the end of February 2013, Boston Dynamics released video footage of a modified BigDog with an arm. The arm could pick up objects and throw them. The robot is relying on its legs and torso to help power the motions of the arm. It is believed that it can lift weights around 55 pounds (25 kg). This work was funded by the United States Army Research Laboratory and paved the way for integrating manipulators with quadrupeds as found on Spot, the spiritual successor of BigDog. === Discontinuation === At the end of December 2013, the BigDog project was discontinued. Despite hopes that it would one day work like a pack mule for US soldiers in the field, the gasoline-powered engine was deemed too noisy for use in combat, and it could be heard from hundreds of meters away. A similar project for an all-electric robot named Spot in 2016 was much quieter, but could only carry 45 pounds (20 kg). Both projects are no longer in progress, but the Spot was only released in 2020. == Hardware == BigDog is powered by a small two-stroke, one-cylinder, 15-brake-horsepower (11 kW) engine operating at 9,000 RPM. The engine drives a hydraulic pump, which in turn drives the hydraulic leg actuators. Each leg has four actuators (two for the hip joint, and two each for the knee and ankle joints), for a total of 16. Each actuator unit consists of a hydraulic cylinder, servo valve, position sensor, and force sensor. Onboard computing power is a ruggedized PC/104 board stack with two computers, one running a Pentium M processor running QNX (used for sensor data processing) and another running a Core Duo processor (used for visual data processing). == Gallery ==
Deep Instinct
Deep Instinct is a cybersecurity company that applies deep learning to cybersecurity. The company implements artificial intelligence to the task of preventing and detecting malware. The company was the recipient of the Technology Pioneer by The World Economic Forum in 2017. Lane Bess has been CEO of the company since 2022. == Overview == In 2015, Deep Instinct was founded by Guy Caspi, Dr. Eli David, and Nadav Maman. The headquarters of the company is located in New York City. In July 2017, NVIDIA became an investor. According to Tom's Hardware, NVIDIA’s investment enabled access to a GPU-based neural network and CUDA platform, which they were using to achieve maximum vulnerability detection rates. As of February 2020, the company had raised $43 million in Series C funding round. In April 2021, Deep Instinct raised $100 million in Series D funding to accelerate growth. == Partnerships == In April 2019, Deep Instinct partnered with Chinese artist, Guo O. Dong on an art project titled, The Persistence of Chaos, consisting of a laptop infected with 6 pieces of malware that represented $95 billion in damages. The art was auctioned with a final bid of $1,345,000. In the same year, Globes reported that, HP Inc partnered with Deep Instinct to launch their security solution HP SureSense, which has been applied to the EliteBook and Zbook devices.
Preference regression
Preference regression is a statistical technique used by marketers to determine consumers’ preferred core benefits. It usually supplements product positioning techniques like multi dimensional scaling or factor analysis and is used to create ideal vectors on perceptual maps. == Application == Starting with raw data from surveys, researchers apply positioning techniques to determine important dimensions and plot the position of competing products on these dimensions. Next they regress the survey data against the dimensions. The independent variables are the data collected in the survey. The dependent variable is the preference datum. Like all regression methods, the computer fits weights to best predict data. The resultant regression line is referred to as an ideal vector because the slope of the vector is the ratio of the preferences for the two dimensions. If all the data is used in the regression, the program will derive a single equation and hence a single ideal vector. This tends to be a blunt instrument so researchers refine the process with cluster analysis. This creates clusters that reflect market segments. Separate preference regressions are then done on the data within each segment. This provides an ideal vector for each segment. == Alternative methods == Self-stated importance method is an alternative method in which direct survey data is used to determine the weightings rather than statistical imputations. A third method is conjoint analysis in which an additive method is used.
Dynamic time warping
In time series analysis, dynamic time warping (DTW) is an algorithm for measuring similarity between two temporal sequences, which may vary in speed. For instance, similarities in walking could be detected using DTW, even if one person was walking faster than the other, or if there were accelerations and decelerations during the course of an observation. DTW has been applied to temporal sequences of video, audio, and graphics data — indeed, any data that can be turned into a one-dimensional sequence can be analyzed with DTW. A well-known application has been automatic speech recognition, to cope with different speaking speeds. Other applications include speaker recognition and online signature recognition. It can also be used in partial shape matching applications. In general, DTW is a method that calculates an optimal match between two given sequences (e.g. time series) with certain restriction and rules: Every index from the first sequence must be matched with one or more indices from the other sequence, and vice versa The first index from the first sequence must be matched with the first index from the other sequence (but it does not have to be its only match) The last index from the first sequence must be matched with the last index from the other sequence (but it does not have to be its only match) The mapping of the indices from the first sequence to indices from the other sequence must be monotonically increasing, and vice versa, i.e. if j > i {\displaystyle j>i} are indices from the first sequence, then there must not be two indices l > k {\displaystyle l>k} in the other sequence, such that index i {\displaystyle i} is matched with index l {\displaystyle l} and index j {\displaystyle j} is matched with index k {\displaystyle k} , and vice versa We can plot each match between the sequences 1 : M {\displaystyle 1:M} and 1 : N {\displaystyle 1:N} as a path in a M × N {\displaystyle M\times N} matrix from ( 1 , 1 ) {\displaystyle (1,1)} to ( M , N ) {\displaystyle (M,N)} , such that each step is one of ( 0 , 1 ) , ( 1 , 0 ) , ( 1 , 1 ) {\displaystyle (0,1),(1,0),(1,1)} . In this formulation, we see that the number of possible matches is the Delannoy number. The optimal match is denoted by the match that satisfies all the restrictions and the rules and that has the minimal cost, where the cost is computed as the sum of absolute differences, for each matched pair of indices, between their values. The sequences are "warped" non-linearly in the time dimension to determine a measure of their similarity independent of certain non-linear variations in the time dimension. This sequence alignment method is often used in time series classification. Although DTW measures a distance-like quantity between two given sequences, it doesn't guarantee the triangle inequality to hold. In addition to a similarity measure between the two sequences (a so called "warping path" is produced), by warping according to this path the two signals may be aligned in time. The signal with an original set of points X(original), Y(original) is transformed to X(warped), Y(warped). This finds applications in genetic sequence and audio synchronisation. In a related technique sequences of varying speed may be averaged using this technique see the average sequence section. This is conceptually very similar to the Needleman–Wunsch algorithm. == Implementation == This example illustrates the implementation of the dynamic time warping algorithm when the two sequences s and t are strings of discrete symbols. For two symbols x and y, d ( x , y ) {\displaystyle d(x,y)} is a distance between the symbols, e.g., d ( x , y ) = | x − y | {\displaystyle d(x,y)=|x-y|} . int DTWDistance(s: array [1..n], t: array [1..m]) { DTW := array [0..n, 0..m] for i := 0 to n for j := 0 to m DTW[i, j] := infinity DTW[0, 0] := 0 for i := 1 to n for j := 1 to m cost := d(s[i], t[j]) DTW[i, j] := cost + minimum(DTW[i-1, j ], // insertion DTW[i , j-1], // deletion DTW[i-1, j-1]) // match return DTW[n, m] } where DTW[i, j] is the distance between s[1:i] and t[1:j] with the best alignment. We sometimes want to add a locality constraint. That is, we require that if s[i] is matched with t[j], then | i − j | {\displaystyle |i-j|} is no larger than w, a window parameter. We can easily modify the above algorithm to add a locality constraint (differences marked). However, the above given modification works only if | n − m | {\displaystyle |n-m|} is no larger than w, i.e. the end point is within the window length from diagonal. In order to make the algorithm work, the window parameter w must be adapted so that | n − m | ≤ w {\displaystyle |n-m|\leq w} (see the line marked with () in the code). int DTWDistance(s: array [1..n], t: array [1..m], w: int) { DTW := array [0..n, 0..m] w := max(w, abs(n-m)) // adapt window size () for i := 0 to n for j:= 0 to m DTW[i, j] := infinity DTW[0, 0] := 0 for i := 1 to n for j := max(1, i-w) to min(m, i+w) DTW[i, j] := 0 for i := 1 to n for j := max(1, i-w) to min(m, i+w) cost := d(s[i], t[j]) DTW[i, j] := cost + minimum(DTW[i-1, j ], // insertion DTW[i , j-1], // deletion DTW[i-1, j-1]) // match return DTW[n, m] } == Warping properties == The DTW algorithm produces a discrete matching between existing elements of one series to another. In other words, it does not allow time-scaling of segments within the sequence. Other methods allow continuous warping. For example, Correlation Optimized Warping (COW) divides the sequence into uniform segments that are scaled in time using linear interpolation, to produce the best matching warping. The segment scaling causes potential creation of new elements, by time-scaling segments either down or up, and thus produces a more sensitive warping than DTW's discrete matching of raw elements. == Complexity == The time complexity of the DTW algorithm is O ( N M ) {\displaystyle O(NM)} , where N {\displaystyle N} and M {\displaystyle M} are the lengths of the two input sequences. The 50 years old quadratic time bound was broken in 2016: an algorithm due to Gold and Sharir enables computing DTW in O ( N 2 / log log N ) {\displaystyle O({N^{2}}/\log \log N)} time and space for two input sequences of length N {\displaystyle N} . This algorithm can also be adapted to sequences of different lengths. Despite this improvement, it was shown that a strongly subquadratic running time of the form O ( N 2 − ϵ ) {\displaystyle O(N^{2-\epsilon })} for some ϵ > 0 {\displaystyle \epsilon >0} cannot exist unless the Strong exponential time hypothesis fails. While the dynamic programming algorithm for DTW requires O ( N M ) {\displaystyle O(NM)} space in a naive implementation, the space consumption can be reduced to O ( min ( N , M ) ) {\displaystyle O(\min(N,M))} using Hirschberg's algorithm. == Fast computation == Fast techniques for computing DTW include PrunedDTW, SparseDTW, FastDTW, and the MultiscaleDTW. A common task, retrieval of similar time series, can be accelerated by using lower bounds such as LB_Keogh, LB_Improved, or LB_Petitjean. However, the Early Abandon and Pruned DTW algorithm reduces the degree of acceleration that lower bounding provides and sometimes renders it ineffective. In a survey, Wang et al. reported slightly better results with the LB_Improved lower bound than the LB_Keogh bound, and found that other techniques were inefficient. Subsequent to this survey, the LB_Enhanced bound was developed that is always tighter than LB_Keogh while also being more efficient to compute. LB_Petitjean is the tightest known lower bound that can be computed in linear time. == Average sequence == Averaging for dynamic time warping is the problem of finding an average sequence for a set of sequences. NLAAF is an exact method to average two sequences using DTW. For more than two sequences, the problem is related to that of multiple alignment and requires heuristics. DBA is currently a reference method to average a set of sequences consistently with DTW. COMASA efficiently randomizes the search for the average sequence, using DBA as a local optimization process. == Supervised learning == A nearest-neighbour classifier can achieve state-of-the-art performance when using dynamic time warping as a distance measure. == Amerced Dynamic Time Warping == Amerced Dynamic Time Warping (ADTW) is a variant of DTW designed to better control DTW's permissiveness in the alignments that it allows. The windows that classical DTW uses to constrain alignments introduce a step function. Any warping of the path is allowed within the window and none beyond it. In contrast, ADTW employs an additive penalty that is incurred each time that the path is warped. Any amount of warping is allowed, but each warping action incurs a direct penalty. ADTW significantly outperforms DTW with windowing when applied as a nearest neighbor classifier on a set of benchmark time series classification tasks. == Alternative approaches == In functional data analysis, time series are regarde
Policy gradient method
Policy gradient methods are a class of reinforcement learning algorithms and a sub-class of policy optimization methods. Unlike value-based methods which learn a value function to derive a policy, policy optimization methods directly learn a policy function π {\displaystyle \pi } that selects actions without consulting a value function. For policy gradient to apply, the policy function π θ {\displaystyle \pi _{\theta }} is parameterized by a differentiable parameter θ {\displaystyle \theta } . == Overview == In policy-based RL, the actor is a parameterized policy function π θ {\displaystyle \pi _{\theta }} , where θ {\displaystyle \theta } are the parameters of the actor. The actor takes as argument the state of the environment s {\displaystyle s} and produces a probability distribution π θ ( ⋅ ∣ s ) {\displaystyle \pi _{\theta }(\cdot \mid s)} . If the action space is discrete, then ∑ a π θ ( a ∣ s ) = 1 {\displaystyle \sum _{a}\pi _{\theta }(a\mid s)=1} . If the action space is continuous, then ∫ a π θ ( a ∣ s ) d a = 1 {\displaystyle \int _{a}\pi _{\theta }(a\mid s)\mathrm {d} a=1} . The goal of policy optimization is to find some θ {\displaystyle \theta } that maximizes the expected episodic reward J ( θ ) {\displaystyle J(\theta )} : J ( θ ) = E π θ [ ∑ t = 0 T γ t R t | S 0 = s 0 ] {\displaystyle J(\theta )=\mathbb {E} _{\pi _{\theta }}\left[\sum _{t=0}^{T}\gamma ^{t}R_{t}{\Big |}S_{0}=s_{0}\right]} where γ {\displaystyle \gamma } is the discount factor, R t {\displaystyle R_{t}} is the reward at step t {\displaystyle t} , s 0 {\displaystyle s_{0}} is the starting state, and T {\displaystyle T} is the time-horizon (which can be infinite). The policy gradient is defined as ∇ θ J ( θ ) {\displaystyle \nabla _{\theta }J(\theta )} . Different policy gradient methods stochastically estimate the policy gradient in different ways. The goal of any policy gradient method is to iteratively maximize J ( θ ) {\displaystyle J(\theta )} by gradient ascent. Since the key part of any policy gradient method is the stochastic estimation of the policy gradient, they are also studied under the title of "Monte Carlo gradient estimation". == REINFORCE == === Policy gradient === The REINFORCE algorithm, introduced by Ronald J. Williams in 1992, was the first policy gradient method. It is based on the identity for the policy gradient ∇ θ J ( θ ) = E π θ [ ∑ t = 0 T ∇ θ ln π θ ( A t ∣ S t ) ∑ t = 0 T ( γ t R t ) | S 0 = s 0 ] {\displaystyle \nabla _{\theta }J(\theta )=\mathbb {E} _{\pi _{\theta }}\left[\sum _{t=0}^{T}\nabla _{\theta }\ln \pi _{\theta }(A_{t}\mid S_{t})\;\sum _{t=0}^{T}(\gamma ^{t}R_{t}){\Big |}S_{0}=s_{0}\right]} which can be improved via the "causality trick" ∇ θ J ( θ ) = E π θ [ ∑ t = 0 T ∇ θ ln π θ ( A t ∣ S t ) ∑ τ = t T ( γ τ R τ ) | S 0 = s 0 ] {\displaystyle \nabla _{\theta }J(\theta )=\mathbb {E} _{\pi _{\theta }}\left[\sum _{t=0}^{T}\nabla _{\theta }\ln \pi _{\theta }(A_{t}\mid S_{t})\sum _{\tau =t}^{T}(\gamma ^{\tau }R_{\tau }){\Big |}S_{0}=s_{0}\right]} Thus, we have an unbiased estimator of the policy gradient: ∇ θ J ( θ ) ≈ 1 N ∑ n = 1 N [ ∑ t = 0 T ∇ θ ln π θ ( A t , n ∣ S t , n ) ∑ τ = t T ( γ τ − t R τ , n ) ] {\displaystyle \nabla _{\theta }J(\theta )\approx {\frac {1}{N}}\sum _{n=1}^{N}\left[\sum _{t=0}^{T}\nabla _{\theta }\ln \pi _{\theta }(A_{t,n}\mid S_{t,n})\sum _{\tau =t}^{T}(\gamma ^{\tau -t}R_{\tau ,n})\right]} where the index n {\displaystyle n} ranges over N {\displaystyle N} rollout trajectories using the policy π θ {\displaystyle \pi _{\theta }} . The score function ∇ θ ln π θ ( A t ∣ S t ) {\displaystyle \nabla _{\theta }\ln \pi _{\theta }(A_{t}\mid S_{t})} can be interpreted as the direction in the parameter space that increases the probability of taking action A t {\displaystyle A_{t}} in state S t {\displaystyle S_{t}} . The policy gradient, then, is a weighted average of all possible directions to increase the probability of taking any action in any state, but weighted by reward signals, so that if taking a certain action in a certain state is associated with high reward, then that direction would be highly reinforced, and vice versa. === Algorithm === The REINFORCE algorithm is a loop: Rollout N {\displaystyle N} trajectories in the environment, using π θ t {\displaystyle \pi _{\theta _{t}}} as the policy function. Compute the policy gradient estimation: g i ← 1 N ∑ n = 1 N [ ∑ t = 0 T ∇ θ t ln π θ ( A t , n ∣ S t , n ) ∑ τ = t T ( γ τ R τ , n ) ] {\displaystyle g_{i}\leftarrow {\frac {1}{N}}\sum _{n=1}^{N}\left[\sum _{t=0}^{T}\nabla _{\theta _{t}}\ln \pi _{\theta }(A_{t,n}\mid S_{t,n})\sum _{\tau =t}^{T}(\gamma ^{\tau }R_{\tau ,n})\right]} Update the policy by gradient ascent: θ i + 1 ← θ i + α i g i {\displaystyle \theta _{i+1}\leftarrow \theta _{i}+\alpha _{i}g_{i}} Here, α i {\displaystyle \alpha _{i}} is the learning rate at update step i {\displaystyle i} . == Variance reduction == REINFORCE is an on-policy algorithm, meaning that the trajectories used for the update must be sampled from the current policy π θ {\displaystyle \pi _{\theta }} . This can lead to high variance in the updates, as the returns R ( τ ) {\displaystyle R(\tau )} can vary significantly between trajectories. Many variants of REINFORCE have been introduced, under the title of variance reduction. === REINFORCE with baseline === A common way for reducing variance is the REINFORCE with baseline algorithm, based on the following identity: ∇ θ J ( θ ) = E π θ [ ∑ t = 0 T ∇ θ ln π θ ( A t | S t ) ( ∑ τ = t T ( γ τ R τ ) − b ( S t ) ) | S 0 = s 0 ] {\displaystyle \nabla _{\theta }J(\theta )=\mathbb {E} _{\pi _{\theta }}\left[\sum _{t=0}^{T}\nabla _{\theta }\ln \pi _{\theta }(A_{t}|S_{t})\left(\sum _{\tau =t}^{T}(\gamma ^{\tau }R_{\tau })-b(S_{t})\right){\Big |}S_{0}=s_{0}\right]} for any function b : States → R {\displaystyle b:{\text{States}}\to \mathbb {R} } . This can be proven by applying the previous lemma. The algorithm uses the modified gradient estimator g i ← 1 N ∑ n = 1 N [ ∑ t = 0 T ∇ θ t ln π θ ( A t , n | S t , n ) ( ∑ τ = t T ( γ τ R τ , n ) − b i ( S t , n ) ) ] {\displaystyle g_{i}\leftarrow {\frac {1}{N}}\sum _{n=1}^{N}\left[\sum _{t=0}^{T}\nabla _{\theta _{t}}\ln \pi _{\theta }(A_{t,n}|S_{t,n})\left(\sum _{\tau =t}^{T}(\gamma ^{\tau }R_{\tau ,n})-b_{i}(S_{t,n})\right)\right]} and the original REINFORCE algorithm is the special case where b i ≡ 0 {\displaystyle b_{i}\equiv 0} . === Actor-critic methods === If b i {\textstyle b_{i}} is chosen well, such that b i ( S t ) ≈ ∑ τ = t T ( γ τ R τ ) = γ t V π θ i ( S t ) {\textstyle b_{i}(S_{t})\approx \sum _{\tau =t}^{T}(\gamma ^{\tau }R_{\tau })=\gamma ^{t}V^{\pi _{\theta _{i}}}(S_{t})} , this could significantly decrease variance in the gradient estimation. That is, the baseline should be as close to the value function V π θ i ( S t ) {\displaystyle V^{\pi _{\theta _{i}}}(S_{t})} as possible, approaching the ideal of: ∇ θ J ( θ ) = E π θ [ ∑ t = 0 T ∇ θ ln π θ ( A t | S t ) ( ∑ τ = t T ( γ τ R τ ) − γ t V π θ ( S t ) ) | S 0 = s 0 ] {\displaystyle \nabla _{\theta }J(\theta )=\mathbb {E} _{\pi _{\theta }}\left[\sum _{t=0}^{T}\nabla _{\theta }\ln \pi _{\theta }(A_{t}|S_{t})\left(\sum _{\tau =t}^{T}(\gamma ^{\tau }R_{\tau })-\gamma ^{t}V^{\pi _{\theta }}(S_{t})\right){\Big |}S_{0}=s_{0}\right]} Note that, as the policy π θ t {\displaystyle \pi _{\theta _{t}}} updates, the value function V π θ i ( S t ) {\displaystyle V^{\pi _{\theta _{i}}}(S_{t})} updates as well, so the baseline should also be updated. One common approach is to train a separate function that estimates the value function, and use that as the baseline. This is one of the actor-critic methods, where the policy function is the actor and the value function is the critic. The Q-function Q π {\displaystyle Q^{\pi }} can also be used as the critic, since ∇ θ J ( θ ) = E π θ [ ∑ 0 ≤ t ≤ T γ t ∇ θ ln π θ ( A t | S t ) ⋅ Q π θ ( S t , A t ) | S 0 = s 0 ] {\displaystyle \nabla _{\theta }J(\theta )=E_{\pi _{\theta }}\left[\sum _{0\leq t\leq T}\gamma ^{t}\nabla _{\theta }\ln \pi _{\theta }(A_{t}|S_{t})\cdot Q^{\pi _{\theta }}(S_{t},A_{t}){\Big |}S_{0}=s_{0}\right]} by a similar argument using the tower law. Subtracting the value function as a baseline, we find that the advantage function A π ( S , A ) = Q π ( S , A ) − V π ( S ) {\displaystyle A^{\pi }(S,A)=Q^{\pi }(S,A)-V^{\pi }(S)} can be used as the critic as well: ∇ θ J ( θ ) = E π θ [ ∑ 0 ≤ t ≤ T γ t ∇ θ ln π θ ( A t | S t ) ⋅ A π θ ( S t , A t ) | S 0 = s 0 ] {\displaystyle \nabla _{\theta }J(\theta )=E_{\pi _{\theta }}\left[\sum _{0\leq t\leq T}\gamma ^{t}\nabla _{\theta }\ln \pi _{\theta }(A_{t}|S_{t})\cdot A^{\pi _{\theta }}(S_{t},A_{t}){\Big |}S_{0}=s_{0}\right]} In summary, there are many unbiased estimators for ∇ θ J θ {\textstyle \nabla _{\theta }J_{\theta }} , all in the form of: ∇ θ J ( θ ) = E π θ [ ∑ 0 ≤ t ≤ T ∇ θ ln π θ ( A t | S t ) ⋅ Ψ t | S 0 = s 0 ] {\displaystyle \nabla _{\theta }J(\theta )=E_{\pi _{\theta }}\left[\su
Vulnerability assessment (computing)
Vulnerability assessment is a process of defining, identifying and classifying the security holes in information technology systems. An attacker can exploit a vulnerability to violate the security of a system. Some known vulnerabilities are Authentication Vulnerability, Authorization Vulnerability and Input Validation Vulnerability. == Purpose == Before deploying a system, it first must go through from a series of vulnerability assessments that will ensure that the build system is secure from all the known security risks. When a new vulnerability is discovered, the system administrator can again perform an assessment, discover which modules are vulnerable, and start the patch process. After the fixes are in place, another assessment can be run to verify that the vulnerabilities were actually resolved. This cycle of assess, patch, and re-assess has become the standard method for many organizations to manage their security issues. The primary purpose of the assessment is to find the vulnerabilities in the system, but the assessment report conveys to stakeholders that the system is secured from these vulnerabilities. If an intruder gained access to a network consisting of vulnerable Web servers, it is safe to assume that he gained access to those systems as well. Because of assessment report, the security administrator will be able to determine how intrusion occurred, identify compromised assets and take appropriate security measures to prevent critical damage to the system. == Assessment types == Depending on the system a vulnerability assessment can have many types and level. === Host assessment === A host assessment looks for system-level vulnerabilities such as insecure file permissions, application level bugs, backdoor and Trojan horse installations. It requires specialized tools for the operating system and software packages being used, in addition to administrative access to each system that should be tested. Host assessment is often very costly in term of time, and thus is only used in the assessment of critical systems. Tools like COPS and Tiger are popular in host assessment. === Network assessment === In a network assessment one assess the network for known vulnerabilities. It locates all systems on a network, determines what network services are in use, and then analyzes those services for potential vulnerabilities. This process does not require any configuration changes on the systems being assessed. Unlike host assessment, network assessment requires little computational cost and effort. == Vulnerability assessment vs penetration testing == Vulnerability assessment and penetration testing are two different testing methods. They are differentiated on the basis of certain specific parameters. == Regulatory requirements == Vulnerability assessments are mandated or strongly recommended by several regulatory frameworks. In the United States healthcare sector, the Health Insurance Portability and Accountability Act (HIPAA) Security Rule requires covered entities to conduct periodic evaluations of their security posture, and a December 2024 Notice of Proposed Rulemaking would explicitly require vulnerability scanning at least every six months for systems containing electronic protected health information. The Payment Card Industry Data Security Standard (PCI DSS) requires quarterly vulnerability scans for organizations that process credit card transactions, and the NIST Cybersecurity Framework includes vulnerability assessment as a core component of its Identify function.
Multimodal learning
Multimodal learning is a type of deep learning that integrates and processes multiple types of data, referred to as modalities, such as text, audio, images, or video. This integration allows for a more holistic understanding of complex data, improving model performance in tasks like visual question answering, cross-modal retrieval, text-to-image generation, aesthetic ranking, and image captioning. Multimodal learning was proposed in 2011 at the beginning of the deep learning period. Large multimodal models, such as Google Gemini and GPT-4o, have become increasingly popular since 2023, enabling increased versatility and a broader understanding of real-world phenomena. == Motivation == Data usually comes with different modalities which carry different information. For example, it is very common to caption an image to convey the information not presented in the image itself. Similarly, sometimes it is more straightforward to use an image to describe information which may not be obvious from text. As a result, if different words appear in similar images, then these words likely describe the same thing. Conversely, if a word is used to describe seemingly dissimilar images, then these images may represent the same object. Thus, in cases dealing with multi-modal data, it is important to use a model which is able to jointly represent the information such that the model can capture the combined information from different modalities. == Multimodal transformers == Models such as CLIP (Contrastive Language–Image Pretraining) learn joint representations of images and text by optimizing contrastive objectives, allowing the model to match images with their corresponding textual descriptions. == Multimodal deep Boltzmann machines == A Boltzmann machine is a type of stochastic neural network invented by Geoffrey Hinton and Terry Sejnowski in 1985. Boltzmann machines can be seen as the stochastic, generative counterpart of Hopfield nets. They are named after the Boltzmann distribution in statistical mechanics. The units in Boltzmann machines are divided into two groups: visible units and hidden units. Each unit is like a neuron with a binary output that represents whether it is activated or not. General Boltzmann machines allow connection between any units. However, learning is impractical using general Boltzmann Machines because the computational time is exponential to the size of the machine. A more efficient architecture is called restricted Boltzmann machine where connection is only allowed between hidden unit and visible unit, which is described in the next section. Multimodal deep Boltzmann machines can process and learn from different types of information, such as images and text, simultaneously. This can notably be done by having a separate deep Boltzmann machine for each modality, for example one for images and one for text, joined at an additional top hidden layer. == Applications == Multimodal machine learning has numerous applications across various domains: Cross-modal retrieval: cross-modal retrieval allows users to search for data across different modalities (e.g., retrieving images based on text descriptions), improving multimedia search engines and content recommendation systems. Classification and missing data retrieval: multimodal Deep Boltzmann Machines outperform traditional models like support vector machines and latent Dirichlet allocation in classification tasks and can predict missing data in multimodal datasets, such as images and text. Healthcare diagnostics: multimodal models integrate medical imaging, genomic data, and patient records to improve diagnostic accuracy and early disease detection, especially in cancer screening. Content generation: models like DALL·E generate images from textual descriptions, benefiting creative industries, while cross-modal retrieval enables dynamic multimedia searches. Robotics and human-computer interaction: multimodal learning improves interaction in robotics and AI by integrating sensory inputs like speech, vision, and touch, aiding autonomous systems and human-computer interaction. Emotion recognition: combining visual, audio, and text data, multimodal systems enhance sentiment analysis and emotion recognition, applied in customer service, social media, and marketing.